Mobile Intermittent Power Failure Fixed

There was something wrong with the power connection on the back of the IC-706MKIIG. Power would sometimes cut in an out, usually when I was driving over bumpy roads. I pulled the cable off and noticed that the pins were bent out of shape. The pins in the connector (cup shaped) were spread too far out and were not making solid contact with the pins on the back of the radio. I had replacement pins, so I yanked each of the old pins from the connector (no easy doing) and soldered on the new pins, slid them into the connector, used the tip of a pair of needle nose pliers to lock them into place. I placed the the power connector back on the rig in the truck and it works great!


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: